• 0Items - $0.00
    • No product in the cart.

We introduction Oars Organic Maecenas sed diam eget risus posuere erat a ante venenatis dapibus posuere velit aliquet diam eget risus posuere. Learn More purchase now

BASIC CONTROLLERS

BASIC CONTROLLERS

01

The Basic irrigation system is an uncomplicated component of general precision agriculture. It determines the soil moisture levels accurately, thereby finding the irrigation requirements at any place.

02

Replacing manual irrigation with automatic valves and systems also does away with the human error element (e.g. forgetting to turn off a valve after watering the field). It is instrumental in saving energy, time, and valuable resources.

03

Irrigating at the correct times will minimise runoffs and other wastages.

04

Create multiple independent preset watering zones to irrigate your crops efficiently.

How it Works

heading-below

“Sentor” is a soil moisture Sensor that detects pre-set moisture level.

icon-box

“Sencom” solar powers “Sentor” and relays wirelessly to “Procom” to either release or stop water via “Valcom”.

icon-box

“Valcom” solar powers “Valtor” and communicates with “Procom” accordingly.

icon-box

"Procom” the main control unit that communicates with all the peripheral devices in the system and sets up prerequisite watering zones.

icon-box
icon-box

The “Sentor” checks if the moisture level has reduced below the pre-set value. And if it rains, it will acknowledge and take that into account.

icon-box

The “Valtor” is switched on and water is provided to your garden or plantation.

icon-box

The “Sentor” checks if the moisture level has now risen to the required level. And if so, the system stops providing water.

benefits of basic controllers

core advantages

heading-below
icon-box

Reduces water wastage.

icon-box

Enhance yields and increase the value.

icon-box

Save time with automated watering.

icon-box

Efficient use of resources and energy.

Basic Controller

Products

heading-below

PROCOM

The Promcom is the main Control Unit, where all the peripheral devices are manged.

  • Its manages devices such as Sencom , Valcom and X-Com in its dedicated private network.
  • It displays all information related to each device on its dedicated network.
  • It allows the user to setup an Irrigation Zones, by pairing a Sencom and Valcom and then setting a corresponding moisture level for that Zone.
  • Powered using its long lasting Li-Poly battery and power charger.

SENTOR

  • Analyses the volumetric moisture level in the soil
  • Powered and integrated into the Sencom unit, whereby should the moisture level decline to the set value then a message will be sent to the Valtor for Adequate water.

VALTOR

  • Powered and integrated into the Valcom unit, whereby should the moisture level decline to the set value then the Valtor will provide adequate water.
  • The VALTOR is connected to the main water supply using most hose fittings.

Type : Pilot operated, Straight Connections

Connection Size: Inlet – 3/4″ BSP Outlet : 3/4″ BSP

Op. Pressure : 0.7 to 6 bar

Flow : 30 gal/min

“We empower Smart Watering for gardens and Economical Watering for Farms”

VALTOR 1.5

  • The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 1.5 will be instructed to provide adequate water.
  • The VALTOR 1.5 is connected to the main water supply using irrigation fittings.
  • Connection Size: Inlet: 1.5” Outlet: 1.5” BSP/NPT – Threaded Version
  • Pressure Rate: 0.4 to 10 bar
  • Flow Rate: 1000 Litres/min

VALTOR 2

  • The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 2 will be controlled to provide adequate water.
  • The VALTOR 2 is connected to the main water supply using irrigation fittings.
  • Connection Size:
    Inlet: 2” Outlet: 2” BSP/NPT- Threaded Version
    Inlet: 2” Outlet: 2” ISO/ASTM – Solvent Version
  • Pressure Rate: 0.4 to 10 bar
  • Flow Rate: 1000 Litres/min
  • ction port.
  • Variable cable lengths available.

VALTOR 3

  • The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 3 will be controlled to provide adequate water.
  • The VALTOR 3 is connected to the main water supply using irrigation fittings.
  • Connection Size:
    Inlet: 3” Outlet: 3” BSP/NPT – Threaded Version
    Inlet: 3” Outlet: 3” ISO/ASTM – Solvent Version
  • Pressure Rate: 0.4 to 10 bar – Flow Rate: 1300 Litres/min

VALTOR 4

  • The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 4 will be controlled to provide adequate water.
  • The VALTOR 4 is connected to the main water supply using irrigation fittings.
  • Connection Size: Inlet: 4” Outlet: 4” BSP/NPT – Threaded Version
    Inlet: 4” Outlet: 4” ISO/ASTM – Solvent Version
  • Pressure Rate: 0.4 to 10 bar
  • Flow Rate: 4100 Litres/min
Close menu